Siser EasySubli

Siser Easysubli - Pack of five sheets. 
 
Siser EasySubli heat transfer vinyl is an innovative new HTV that allows you to use a sublimation printer to add full color designs onto light or dark colored polyester and cotton fabrics.
 
Siser EasySubli heat transfer vinyl sheets can be used with any brand of sublimation printer and ink but it was formulated to use with Sawgrass printers and inks for the best results.
 
Siser EasySubli HTV Application Instructions
 
Applies to 100% Polyester, 100% Cotton, Poly/Cotton blends, and most other fabrics.
Before application or masking, place the printed design on the lower platen of the heat press for 45 seconds to allow the radiating heat from the upper platen to set the ink. Do not close the heat press. Alternatively, you can set the printed design aside and allow it to air-dry for 2 hours.
Pre-heat the heat press to 311° F (155° C)
Pre-press the garment for several seconds to remove wrinkles and moisture
Remove the printed or masked design from the backing sheet and place it on the garment in the desired location
Cover the design with a piece of parchment paper or siliconized sheet to prevent the ink from transferring to the upper platen
Press for 15 seconds using medium pressure
Peel off the cover sheet and/or mask while warm
Washing Instructions:
 
Wait 24 hours before first wash
Turn garment inside-out for best results
Machine wash warm or cold with mild detergent
Do not use bleach
Dry on low dryer setting
Do not dry clean
Note: Because of the wide variety of fabrics and garment manufacturers that exist, we highly recommend that this product be fully tested prior to going into production.